? epcos ag 2008 . reproduction, publication and dissemination of this p ublication, enclosures hereto and the information contained therein withou t epcos prior express consent is prohibited. smt inductors simid series, simid 2220-a series/type: b82442a d ate: march 2008
2 03/08 please read cautions and warnings and important notes at the end of this document. size 2220 (eia) or 5650 (iec) rated inductance 1 h to 10000 h rated current 25 ma to 1800 ma construction upright ferrite drum core laser-welded winding flame-retardant molding features temperature range up to 150 c current handling capability up to 1.8 a high inductance ratings qualified to aec-q200 suitable for lead-free reflow soldering as referenced in jedec j-std 020c rohs-compatible applications filtering of supply voltages, coupling, decoupling dc/dc converters automotive electronics telecommunications (e.g. blocking filter for 12- and 16-khz counting pulses) consumer electronics industrial electronics terminals base material cusn6 layer composition cu, ag, sn (lead-free) 1) electro-plated marking marking on component: manufacturer, l value (in nh), tolerance of l value (coded), date of manufacture (ywwd) minimum data on reel: manufacturer, ordering code, l value, quantity, date of packing delivery mode and packing unit 12-mm blister tape, wound on 330-mm reel packing unit: 1500 pcs./reel 1) ni-barrier-plated terminals on request (b82442a*50). b82442a smt inductors, simid series simid 2220-a
3 03/08 please read cautions and warnings and important notes at the end of this document. dimensional drawing and layout recommendation taping and packing blister tape reel dimensions in mm ind0088-3-e 0.70.2 1) 1) 3.50.1 5+0.3 5.6+0.3 5+0.3 0.15 max. 0.7 min. 1) marking 1) soldering area ind0053-6 c d b a b abcd 4.5 2.0 4.0 8.0 dimensions in mm ind0564-h-e 40.1 20.05 1.750.1 < _ 7.2 1.5+0.1 80.1 1.60.1 5.50.1 120.3 6.0 < _ direction of unreeling component ind0350-s 621.5 18.4 max. 130.2 +0 2 330 _ 12.4 0 +1.5 _ b82442a smt inductors, simid series simid 2220-a
4 03/08 please read cautions and warnings and important notes at the end of this document. technical data and measuring conditions rated inductance l r measured with impedance analyzer agilent 4294a at frequency f l , 0.1 v, 20 c q factor q min measured with impedance analyzer agilent 4294a at frequency f q , 20 c rated temperature t r 105 c rated current i r maximum permissible dc with inductance decrease l/l 0 10% and temperature increase of 20 k at rated temperature self-resonance frequency f res,min measured with network analyzer agilent 8753d, 20 c dc resistance r max measured at 20 c solderability (lead-free) sn95.5ag3.8cu0.7: (245 5) c, (5 0.3) s wetting of soldering area 90% (based on iec 60068-2-58) resistance to soldering heat 260 c, 40 s (as referenced in jedec j-std 020c) climatic category 55/150/56 (to iec 60068-1) storage conditions mounted: C55 c +150 c packaged: C25 c +40 c, 75% rh weight approx. 0.4 g b82442a smt inductors, simid series simid 2220-a
5 03/08 please read cautions and warnings and important notes at the end of this document. characteristics and ordering codes closer tolerances on request. higher currents possible at temperatures 6 03/08 please read cautions and warnings and important notes at the end of this document. characteristics and ordering codes closer tolerances on request. higher currents possible at temperatures 7 03/08 impedance |z| versus frequency f measured with impedance analyzer agilent 4191a/4194a, typical values at 20 c q factor versus frequency f measured with impedance analyzer agilent 4191a/4194a, typical values at 20 c inductance l versus dc load current i dc measured with lcr meter agilent 4275a, typical values at 20 c current derating i op /i r versus ambient temperature t a (rated temperature t r = 105 c) ind0089-b 10 f 10 10 10 10hz 59 8 7 6 0 10 10 1 10 2 10 3 10 4 10 5 10 6 1 h 10 h 100 h 1000 h 10000 h b82442a z || ind0091-4 10 f 10 10 10 10hz q 48 7 6 5 0 20 40 60 80 1 h 10 h 100 h 1000 h 10000 h b82442a ind0090-9 10 i a h l 10 10 0 10 1 10 2 10 3 10 4 10 5 10 0 10 1 10 dc 10000 h 1000 h 100 h 10 h 1 h _ 1 _ 1 2 _ b82442a ind0092-v-e 0 0 0.2 0.4 0.6 0.8 1.0 1.2 i r op i a t 20 40 60 80 100 120 160 b82442a c b82442a smt inductors, simid series simid 2220-a
8 03/08 cautions and warnings please note the r ecommendations in our induc tors data book (latest edition) and in the data sheets. C particular attention should be paid to the derating curves given there. C the soldering conditions should also be observed. temperatures quoted in relation to wave soldering refer to the pin, not the housing. if the c omponents are to be washe d varnished it is necessary to check whether th e w ashing varnish agent that is used has a negative effect on the wire insulation, any plastics that are used, or on glued joints. in partic ular, it is poss ible for w ashing varni sh agent resid ues to have a negative effect in the long-term on wire insulation. the following points must be observed if the components are potted in customer applications: C many potting materials shrink as they harden. they therefore exert a pressure on the plastic housing or core. this pressure can have a deleterious effect on electrical properties, and in extreme cases can damage the core or plastic housing mechanically. C it is nec essary to check whether the po tting material us ed atta cks or de stroys the wire insulation, plastics or glue. C the effect of the potting material can change the high-frequency behaviour of the components. ferrites are sensitive to direct im pact. thi s can ca use the core material to flake, or lea d to breakage of the core. even for customer-specific products, conclusive validation of t he component in the c ircuit can only be carried out by the customer. please read cautions and warnings and important notes at the end of this document.
9 03/09 important notes the following applies to all products named in this publication: 1. some parts of this publication contain statements about the s uitability of our products for certain areas of application . these statem ents are based on our knowledge of typical requirements that are often place d on our produc ts in the areas of a pplication concerned. we nevertheless e xpressly po int out that such statements cannot be regarded as binding statements about the suitability of our produc ts for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product specification is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. in cus tomer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failu re of an el ectronic co mponent could endange r human l ife or he alth (e.g. in ac cident prevention or life-saving systems), it must ther efore be ensured by means of suitable design of the cu stomer application or othe r acti on tak en by the cu stomer (e.g. in stallation of protec tive circuitry or redundancy) that no injury or da m age is sustained by third parties in the e vent of malfunction or failure of an electronic component. 3. the warnings, cautions and product-specific notes must be observed . 4. in order to s atisfy c ertain technical requirements, some of the products de scribed in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they a re classed as haz ardous) . useful in formation on thi s wil l be fo und i n o ur material d ata sheets on the internet (w ww.epcos.com/material). should yo u have any mo re detailed questions, please contact our sales offices. 5. we constantly strive to imp rove our prod ucts. consequently, the products desc ribed in this publication may cha nge fr om time to time . the s ame is true of th e corresponding product specifications. p lease c heck therefore to what extent produ ct des criptions and spec ifications contained in this publication are still applicable before or when you place an order. we a lso reserve the r ight t o discontinue production and delivery of products . consequently, we can not guarantee that al l products named in thi s publication will always be available. the aforeme ntioned does n ot apply in the c ase o f indiv idual agreem ents dev iating from the foregoing for customer-specific products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the ge neral terms of delivery for products and services in the e lectrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, csmp, cssp, ctvs, dssp, miniblue, mkk, mlsc, motorc ap, pcc, phasecap, phas ecube, phasemod, siferrit, sifi, s ikorel, silvercap, simdad, sim id, sineformer, siov, sip5d , sip 5k, therm ofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.
|
